One might think how hard could it possibly be to capture an object? Little do they know that product photography is an in-depth field that has a lot of science, technology, physics and dynamics being controlled by the master-the photographer. Clicking for a purpose, like a project, only adds to the pressure. Devang Singh, a product photographer, understands the basics and the tricks. Here, he shares his lens and his vision.

The Photographer

1. Understand the Brief and Your Subject.

Before the physical production of a photograph, the shoot needs to go through a mental process, regardless of whether it’s a 50 Cent Solitaire or something as large as a washing machine. During this process, ask yourself the following questions like ‘What is the scale of the product?’ because this will help you visualise the space required for shooting and lensing. Also, ‘How many sides/facets does the product have?’ as this will enable you to get an idea of the number of lights required along with the framing. This is followed by questions like ‘What is the surface material, whether it is metal reflective, matt, textured etc.’ and ‘What are the styling requirements of the campaign.’ Such a Q n A session with one’s self helps give direction.

The Photographer

2. Prepare a Mood Board for Yourself/Client.

Once answers to the above questions have been obtained, start making the mood board to help bring into perspective your thoughts that enables team mates understand your vision. It helps in keeping all stakeholders on the same page leaving no room for miscommunication.

The Photographer
The Photographer

3. At Shoot.

At the time of the shoot, equipment that you will need is a 35 mm DSLR, 24 mm, 35mm, 50mm macro or non-macro, 85mm and a 100mm macro lens, minimum four light set up- 200W to 500W, light meter, light modifiers that include soft boxes, reflectors strip boxes, bounce boards- white, silver and gold, mirrors for concentrated reflections, a black chart to cut out extra light, a sturdy tripod with a sandbag and finally a laptop to tether capture and observe all details.

The Photographer

4. Understand Camera Settings and DOF.

If shooting in a controlled environment, like an indoor studio, it is important to keep a few things in mind. It is preferable to shoot custom white balance using a grey card. It’s also important to control shutter speed. For example, always shoot below 1/160 when using staple light setups of Profoto or Elinchrom FX/RX series. This is to make sure the camera syncs with the light and doesn’t give you a black band at the edge. If you are shooting splashes or moving subjects which demand faster shutters, take a wider shot and crop the black band or use a speed light at low intensities like 1/32 or 1/64.

The Photographer

5. Two Scenarios You Shall Face.

If you are shooting products for a catalogue which requires shooting the product in focus through and through, then maintain a distance of at least four feet from the product and try shooting at apertures from f/11 up to f/16 from a 50mm lens.

The Photographer

When conducting a stylised product shot which demands the product to be separated from the background and other props, then there are various ways to deal with it. One can go as close to the subject using wide lenses with wide apertures like f/1.8 and blur the background. Another option is to use a telephoto till 100mm at mid apertures f/5.6 – f/8 to avoid compression of the frames and make the product look smaller than it really is. Finally, one can also use low angle with forced perspective, head on, side or even a 45 degree top down.

The Photographer

6. Understand Lighting and Light Attachments.

Light plays the most important role in creating a spectacular image. It’s best to pre-plan using lighting diagrams in order to avoid any surprises on set. Use soft light for reflective surfaces and cut light with cutters to create gradation. It’s also important to understand highlights and shadows and to always have the final image in mind. The treatment in post-production should already be in your head while you shoot. Another point to add is the use of hard light for rims if required to separate subject/product.

The Photographer

Essential Tricks:

1. Carry a polarizer to minimize highlight and to get details in burnouts on reflective surfaces.
2. Carry a dulling spray to make glossy surfaces matt. Please note that excessive usage of the same can result in a wrong representation of the surface of the subject. Hence, use carefully.
3. Lock down your tripod and maintain a frame and add things to make the image.

The Photographer
Product and Automobile Design

Published in Issue 27

This issue explores one of the widely discussed product design and automobile #design which is very close to our heart. We spoke to few leading names to find out the future of product design and understand the Indian designer sensibilities and practices. Everyone believe that it’s not just functionality but also the visual appeal of the product which plays a crucial in the success of a product. This issue is a bundle of inspirations and insights from the well know product and automobile designers. A must read which you will enjoy for sure.


Order Your Copy!
Creative Gaga - Issue 55